HP Supplies Recycling
HP Supplies Recycling
Packaging Instructions
| The following instructions provide detailed information for packaging and returning your empty HP printing supplies. | |||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
HP ink return envelope |
||||
|
||||
|
||||
 |
|
1. |
|
Place supplies in the envelope. |
|
||||
 |
|
2. |
|
Remove protective strip from envelope flap. |
|
||||
 |
|
3. |
|
Fold flap to seal the envelope. |
|
||||
 |
|
4. |
|
Give sealed envelope to a U.S. Postal Service carrier, or drop off at a U.S. Postal Service office. |
|
||||
| Back to top › | ||||
|
||||
HP ink supplies collection box |
||||
|
||||
|
||||
 |
|
1. |
|
Open the box and make sure the plastic liner is inside the box to protect the cardboard from any leakage, should it occur. Fill the box more than half full, but do not overfill the box, as this may cause the plastic liner to rupture. |
|
||||
 |
|
2. |
|
When box is full, close the plastic liner and seal it with the attached tape. |
|
||||
 |
|
3. |
|
Seal the cardboard box using your own adhesive tape. |
|
||||
 |
|
4. |
|
Give the package to the label's carrier during your next delivery, or take to the carrier's authorized drop-off location. For carrier information and locations:
|
|
||||
| Back to top › | ||||
|
||||
Single HP LaserJet supply |
||||
|
||||
|
||||
 |
|
1. |
|
Place empty supply into the bag and box that came with your new HP LaserJet printing supply. |
|
||||
 |
|
2. |
|
Close box using flaps, as illustrated. |
|
||||
 |
|
3. |
|
Place shipping label on front of box, as illustrated. |
|
||||
|
|
4. |
|
Give the package to the label's carrier during your next delivery, or take to the carrier's authorized drop-off location. For carrier information and locations:
|
|
||||
| Back to top › | ||||
|
||||
Multiple HP LaserJet supplies |
||||
|
||||
|
||||
 |
|
1. |
|
Package empty supplies as described above. Tape up to eight single boxes together (maximum 70 pounds). Use a single pre-paid shipping label.
|
|
||||
| OR | ||||
|
||||
 |
|
1. |
|
Place empty supplies without packaging into collection box provided by HP or use a suitable replacement. Use a single pre-paid shipping label. Box should be full but not bulging. |
|
||||
|
|
2. |
|
Give the package to the label's carrier during your next delivery, or take to the carrier's authorized drop-off location. For carrier information and locations:
|
|
||||
| Back to top › | ||||
|
||||
|
||||
|
||||